Replacement Parts - Page 62

Manufacturer: Zacro Brand: Zacro

Product parameters: INPUT£ºAC100-240V 50/60HZ MAX:150MA OUTPUT: USB 5.0V==1000MA BATTERY END: 4.35V==600MA Available as: Samsung SM-G900F for Europe Samsung SM-G900I for Asia Samsung SM-G900K/G900L/G900S for Korea Samsung SM-G900M for Vodafone Samsung SM-G900A for AT&T Samsung SM-G900T for T-Mobile Samsung SM-G900W8 for Canada Features: Supports dual output, charging the battery at the same time supports USB output charge Multiple circuit protection to prevent overcharging Tested with strict quality control standards Imported IC components, high circuit efficiency, stable performance Foldable AC plug, easy to carry and use. Package included: 1 x Zacro Spare Battery Charger Warranty: Every Zacro product includes an 45 days money-back & 24-month warranty. Please buy with confidence and don't hesitate to contact us if having any questions, we will get to you within 24 hours. Note: The indicator light is red when charging，it is blue when fully charged

Manufacturer: RSTH Brand: RSTH Color: Black

Compatible with : iPhone 6 LCD*Please Be Note: We provide preassembled replacement for iPhone 6 LCD Digitizer without home button earpiece,front camera flex and Metal Plate* [Tools Package List] 1 x Rose Metal Screwdriver 2 x Plastic Opening Tool 2 x Triangular pry piece 1 x Suction Cup 1 x Cleaning Cloth 1 x Check card pin [Instruction ] If you are experiencing any installation issues, please follow any of these steps: 1. Please check the LCD to make sure the flex cable is in good condition and there is no debris on the connector. 2. Disconnect and reconnect the cable from the motherboard side. 3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 4. Make sure for iPhone 6 IOS is upgraded to the latest version. 5. Leave the phone alone for a bit in a dry environment. Sometimes there is static after install that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning. [Very Important] It is highly suggested that all items must be tested before fully installing. Any item found to have been fully installed and broken during the installation process is not returnable or replaceable. Inspect the item closely before installing. We are recommend that if you have not repaired a wireless device in the past that you consult a professional before purchasing. For mobile phone models: A1586/A1549/A1589.

Manufacturer: SZHSR Brand: SZHSR Color: White

Only fit for iPhone 6 4.7inch Note: The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen, so total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported. If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps: 1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors. 2.Disconnect and reconnect the flex cables from the motherboard side. 3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 4.Make sure for iPhone 6 IOS is upgraded to the latest version. 5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning. Package Include: 1* LCD Screen for iPhone 6 4.7inch 1* Phone Ring Stand 1* Set Repair Tool Kits 1* Retail Box 1* Instruction

Manufacturer: emPower Brand: WEELPOWER Model: LYSB01M06GUXU-ELECTRNCS

If you encounter the following problems during the installation process, please follow any of these steps: 1.If camera and speaker can't be use,please check if you put the camera and speaker in right place and try to installation the screen again. 2.If install the screen all in good condution,but can't power on,please make sure for iPhone IOS is upgraded to the latest version. 3.If after install the screen there appear regular lines on the screen,please separate the screen and leave the phone alone for a bit in a dry environment. Sometimes there is static after install that will go away after some time. Please leave phone alone overnight and then install again see if this problem persists in the morning. 4.If after install the screen can't be touch,Separate the screen from the other part,then Wipe the cable with alcohol.Reinstall the screen, please press tight on the ribbon cables to make sure they are connected well.Then, restart your phone. About the Warranty，return,replace: 1.If you are not satisfied with my product ,you can return the product Within 7 days no need any reason,BUT must keep the product as new and pay for shipping fee by youself.We will offer you returen address and full refund you as soon as possible.If the packade is damage when it arrived ,we will send you a new one in free or full refund you and no need to return the damage product. 2.It is highly suggested that all items must be tested before fully installing. Any item found to have been fully installed and broken during the installation process is not returnable or replaceable. Inspect the item closely before installing. We are recommend that if you have not repaired a wireless device in the past that you consult a professional before purchasing. Package 1 x LCD screen replacement for iPhone 5C 1 x repair kit 1 x User manual iPhone,Home button and camera are not included.

Manufacturer: CLWHJ Brand: CLWHJ Model: 6S-4.7-W-01 Color: white-0

Color: white 1.This full set LCD & touch screen digitizer glass assembly is compatible For iPhone 6s(4.7inch). 2. Replacement part for your cracked or broken screen . 3. All items have checked before shipped out and 100% working. 4. Professional technician is needed for installation 5. Please note：Please reinstall the screen and double check the display and touch cable if the screen not working after you install. 6. Instructions are NOT provided. Best place to find step by step videos is on YouTube or follow product images.

Manufacturer: Corepair Brand: Corepair Color: Black

Note:1. Product was pre-assembled. Convenient for replacing and installing.2. Corepair® will responsible for any damage during shipping or quality problem. So make sure your products are bought from Corepair®.Specification:1. Screen Size: 4.7 inches2. Display Type: Multi- Touch (IPS tech)3. Outer Glass: Corning Gorilla Glass 34. Resolution: 1334x750 pixels (326ppi pixel density)5. Front camera: 120 Megapixel6. Color: Black7. Compatibility: iPhone 6 (Not for iPhone 6S)Package including:- Main Parts:1 x iPhone 6 LCD touch screen+ digitizer assembly1 x Front camera1 x Ear speaker1 x Front microphone1 x Proximity sensor1 x Light sensor1 x LCD metal back plate1 x LCD heat shield NOTE: All the components above were pre-assembled. (WITHOUT Home button)- Replacement Repair Tools:1 x Philips screwdriver1 x Pentalobe screwdriver2 x Triangle Pry Pick1 x Suction Cup1 x Dust Wipes1 x Sim card pinNOTE: Screwdriver head with magnetic. (Convenient for dealing with tiny screws)- Free gift:1 x 9H hardness Tempered Glass for iPhone 6Installation Notice:1. Please disconnect the battery cable before installation or make sure your phone is powered off. This will protect your phone from incorrect installation damage.2. Please watch a video tutorial before installation. To be careful and patient can avoid some unnecessary mistakes. (Each customer will receive an email which contains the repair video url.)3. There are many screws when you replacing the assembly which are different in size and length. You'd better to mark them otherwise it may broke the screen if you put the screw in wrong place.4. The flex cables are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it. Handle Carefully!

Brand: Pax Model: LYSB019HIR82I-ELECTRNCS

Manufacturer: CLWHJ Brand: CLWHJ Model: 6S-4.7-white-4 Color: white

Color: white 1.This full set LCD & touch screen digitizer glass assembly is compatible For iPhone 6s(4.7inch). 2. Replacement part for your cracked or broken screen . 3. All items have checked before shipped out and 100% working. 4. Professional technician is needed for installation 5. Please note：Please reinstall the screen and double check the display and touch cable if the screen not working after you install. 6. Instructions are NOT provided. Best place to find step by step videos is on YouTube or follow product images.

Manufacturer: SANKA Brand: SANKA Model: LYSB01E3IMZ7K-ELECTRNCS Color: White

Notice 1.When disassembling your iPhone 6s, please don't just pull the screen out directly.The ribbon cable of the "Home" button is connected to the screen.It is very flimsy.You should open up the screen a little,disassemble the ribbon cable and then get the screen out. 2.When install the screw of the camera, please notice that the long screw must be at the top left corner, or it will damage the LCD screen. 3.If the phone is deformed, it is easy to get stuck when installing, please do not press down directly, it's easy to burst the screen, you should press it downward by flat pushing. 4.The screen belongs to fragile items, so please be careful when you install it in case it break. 5.This is not an easy job for someone who has no experience at all. The detailed installation guideline at the bottom of the description. It is just for your reference.We will not be held responsibility for any damages to this part and your device caused by your wrong operation. Q & A: Q:Why doesn't the phone touch screen respond to command?Why there are some regular stripes on the screen? A:There are 2 ribbon cables on the screen, one is display cable, the other is touch cable. If the display of your phone is ok, but the screen does not respond to command or there is many lines on the screen, I am afraid that the touch cable is not well installed . Please try the following steps to solve this problem: 1. Separate the screen and the other part. 2. Install the screen, please press tight on the ribbon cables to make sure they are well connected. 3. Then, restart your phone. Package includes: 1*LCD Touch Screen Frame Assembly for iPhone 6s 1*Repair tools kit Home button and camera are not included.

Manufacturer: CLWHJ Brand: Honghao Model: LYSB00Z2Z27Q8-ELECTRNCS Color: black

Please don't be hesitated to contact us directly. We are very willing to help you solve any problem. Notice: 1, Please check the item appearance carefully at the first time when you received it to confirm whether there is appearance breakage. If any problems, Please do not hesitate to contact us and providing photos for the problem. We will resolve for you soon. 2, We are responsible for any damage during transit or quality problem.Buy With Confidence. Customer Support, but we are not responsible for any incorrect operation of yourself. 3, There are many screws when you replace the assembly.They are different sizes and length. You'd better to mark them Or it will be easy broke the screen if you put the screw in wrong place. 4, This item is without home button , camera , ear piece, and without the cables for home button and camera. Please check carefully before buying. 5, Have patience. The replacement process is not complicated at all. If you have any question. Please contact us, We will provide professional customer service.