Wilson 8599803-Way Signal Splitter 50Ohm - N Connectors -4.8 dB, 700-2700 MHz

Manufacturer: WILSON ELECTRONICS Brand: Wilson Electronics Model: 859980

WILSON ELECTRONICS 859980 3-WAY 700 MHZ-2,300 MHZ SPLITTER WITH N FEMALE CONNECTORSWEIGHT: 0.75 LBS; FREQ: 800 MHZ, 1,900 MHZ, DUAL BAND, IDEN ; IMP: 50ohm ; N-FEMALE CONNECTOR; EQUAL SIGNAL SPLIT RATIO, BOTH PORTS -4.5 DB

Manufacturer: maxmostcom Brand: maxmostcom Model: GD-BV1102

Yagi antenna is ideally suited for providing and/or improving reception in residential homes, work shops, small-sized parking garages, basements , small office areas, rural areas and places where the reception is weak. It will help to boost signal and increase data transfer speed. The package contains Log Periodic Yagi Antenna with 30ft cable, mounting hardware and Antenna adapter cable for Bandrich Bandluxe R501 R506 R510 R512 R508 R509 4G LTE WIFI Router 700MHz-2700MHz Log Periodic Yagi Antenna * Frequency Range (MHz): 698-960/1710-2700 mHz * Gain: 11 dBi * VSWR: < = 1.7 * Input Impedance: 50 ohms * Polarization: Vertical or Horizontal * Horizontal Beamwidth (o) (half-power): 60±8/55±8 * Vertical Beamwidth (o)(half-power): 50±5/45±5 * Front to Back Ratio(dB): >=21 * Max, power(W): 100 * Connector Type on Antenna: FME male * Lightning Protection: DC ground * Antenna Dimension (mm): 445x210x70 * Rated Wind Velocity(km/h): 100 * Radome material: protected ABS * Cable on Antenna (mm): 400 * Diameter of installation pole(mm): 30~53 * Working Temperature(C): -40~+60 * LMR200 Low-Loss Extension Cable * Cable length: 30ft * Extension Cable connector: FME Female Bandrich Bandluxe R501 R506 R510 R512 R508 R509 4G LTE WIFI Router Antenna Adapter * Connector: FME Male * Cable: RG174 * Length : 17 in * Impedance: 50 ohms The wide Band Log Periodic Directional Antenna will collect the cell tower signal and send it through the cable to an ampl...

Manufacturer: maxmostcom Brand: maxmostcom Model: G2-FQCS-9SVO

The yagi antenna provides an advantage in weak signal areas or for repeater systems. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will lose its effectiveness. The 51" boom is the main part of the antenna and includes 28 elements constructed aluminum. The output coaxial connector is an FME Male type.The antenna's impedance is 50 ohm with a maximum power rating of 100W. Pipe mount hardware is included. Unique design, the main boom comes into two pieces to make package size in half, easy to carry and install. The package contains 18db high gain Yagi antenna, mounting hardware and 30ft cable which has SMA Male connector for Verizon Home Phone Connect F256VW 18DB Gain Yagi ANTENNA * Antenna Frequency: 824-896MHz,890~960MHz,1800MHz,1900MHz * Gain: 18dBi * Cable: LMR200 Low-Loss Cable * Cable Length: 30ft * Dimension (mm) 1300x200x58 * Impedance 50 ohm * VSWR ≤2 * 28 ELEMENTS * Rated Wind Velocity(km/h) 100 * MAX POWER 100W * Connector: FME female to SMA Male * Diameter of installation pole(mm) 30 ~53* Working Temperature(℃) -40~+60 * Lightning Protection DC ground* Material Aluminium * Rated Wind Velocity(km/h) 100* Polarization Vertical or Horizontal

Manufacturer: Wilson Electronics Brand: Wilson Electronics Model: 301123

Dual-Polarity ceiling mount antenna for amplifier/repeater systems. Compatible with Cellular, PCS and iDEN (Nextel, Southern LINC, Mike). Mount on the interior of homes, apartments, condominiums, offices, buildings, and warehouses. Part Number: 301123 Frequency Range: 800-900 MHz Impedance: 50 ohms Polarity: Horizontal and Vertical Gain: 5.2 dBi / 4.0 dBi Beamwidth Hor. Plane 360° Beamwidth Ver. Plane 150° VSWR: 1.5 : 1 Connector: N Female Diameter: 7.72 inches / 19.6 cm Weight: 0.69 lbs Connector: N/Female Directly to Amplifier or Splitter: Use 9913 Extension Cable (sold separately). For 9913 Low Loss Cable: No adapters required.

Manufacturer: zBoost Brand: zBoost Model: YX014 Color: Grey

The zBoost YX014 Outdoor "J" Pipe Mount is the perfect way to mount any of the optional upgrade zBoost signal (outdoor) antennas. Allows for mounting on practically any surface at any angle.

Manufacturer: uzone international Brand: Phonetone Color: grey

WARNING: This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You must have an FCC LICENSE or express consent of an FCC licensee to operate this device. Working with Sprint, T-Mobile, Alltel, AT&T, Verizon, Metro PCS, U.S. Cellular, Bell Mobility,Rogers Wireless etc, which operating on the frequency of 824-849MHz/1850-1910MHz,869-894MHz/1930-1990MHz------Shipping from China by UPS, ePackage, FedEx or DHL, taking about 6~12 business shipping days. Tips 1. Before purchase, please double check the signal frequency of your present service. You can consult your signal carrier or local electrician about this. Booster could only work on exactly same frequency signal. 2. You should have at least one bar signal outside, boosters can not work if there is totally no signal. 3. Outdoor antenna should be installed 2 meters higher of your roof or put it on a high open place, so it can get better reception. 4. Outdoor and indoor antenna should be well seperated by wall to avoid interferrence, putting them as far as more than 10 meters. 5. The machine would get hot if it works for you. If it does not get hot, contact us . Package include : 1* 850/1900MHz 65db repeater 1* Indoor 3dbi wireless Mini antenna 1* Outdoor 8dbi Fiberglass antenna , extra 10M cable 1* Adapter 1* Manual

Manufacturer: Wilson Electronics Brand: Wilson Electronics

Includes everything needed to add a second antenna to most 50 ohm building kits Wilson 50 Ohm Dual Band Ceiling mount Dome antenna (301121) Wilson 700-2300MHz Signal Splitter (859957) Wilson 2' Ultra Low Loss Coax Cable (952302) Wilson 35' Ultra Low Loss Coax Cable (952335)

Manufacturer: Phonetone Technology Brand: Phonetone Color: 850/1700MHz

Note: This booster CAN NOT work in the USA.If you DO NOT know how to choose a booster, please contact with us. Introduction: The booster kit includes an booster, an indoor antenna and an outdoor antenna, the outdoor antenna can pick up good mobile signal from outside of your house, and send the signal through coaxial cable to the booster, the booster can amplify the signal, then the amplified signal is sent to the indoor antenna, the indoor antenna can transmit the signal into your house, so you can enjoy clearer phone call or faster mobile date inside your house. Installation Steps: 1. Mount the Outdoor Antenna. Choose a location for the Outdoor Antenna using your cell phone to determine the area of strongest signal. 2. Place the Phonetone Base Unit where you want to create a Cell Zone. For the widest possible signal area, position the Base Unit near the middle of a room. 3. Connect the Indoor Antenna to the Base Unit and place it where you need signal. 4. Run the provided coaxial cable between the Base Unit and Outdoor Antenna. 5. Connect the Phonetone Base Unit to the provided power supply and plug into a power outlet. Package: 1. 1 * Booster 2. 1 * Power Adapter 3. 1 * Mounting Screw Kit 4. 1 * English User Manual 5. 1 * Indoor Antenna 6. 1 * Outdoor Antenna Preparing to Buy a Booster: 1. Check your frequency, because different Phone Providers operate on different frequencies and the booster can only work on correct frequency.For more detail, refer to www.unlockonline...

Manufacturer: wilson Electronics Brand: Wilson Antenna

Wilson 824-894/1850-1990 MHz (Cellular/PCS) dual band in-vehicle wireless 40 dB bi-directional amplifiers and kits provide up to 3 watts maximum output power. Smart Technology adjusts the power based on the cell sites requirements ensuring that it is within the carrier's specifications.