Easy Fit Waterproof Tough Case Motorcycle Mount for iPhone 4S

Manufacturer: China Brand: Casewarehouse Model: 5341932 Color: Black

Item Description * 100% Brand New & Unused in its original package. Made specially for iPhone 6s/6 4.7" Up to 130FT 40Meters IP8X Waterproof Underwater Photo Housing. Made from Polycarbonate, ABS plastic and Stainless Steel; With seal and o-ring for better waterproof result. * Clear interface, design with compass on the back, ideal for diving at sea, surfing, snorkeling, skiing, yacht or other activities. Also suitable for rainy, snowy and etc environment. 1meter Shockproof, -10degrees Freeze-proof, and IP6X dust-proof * Anti-reflection window for high quality pictures Enable your phone to take high resolution pictures underwater with convenience. The ability to equip bracket, external flash and diving torch. The lens is equipped with 32mm fish-eye adapter to connect external 32mm fish-eye and micro-lens * Please read through the instruction manual before use and to test its waterproof function, put the case into water (without your phone in it) under 15cm for 10minutes; Moving the waterproof case rapidly between hot and cold temperature may cause condensation, if this occurs please stop underwater activities and to wipe off droplets before use. * It is recommended to rinse the outside of case after use with clean/fresh water and ensure it's dry out before storage. Specifications: * Material: PC, stainless steel, silicone rubber * Working temperature: 0 ~ 40degrees * Products size: 17cm x 8.5cm x 3.7cm * Product weights: 277g * Package size: 27cm x 11.5cm x 4.5cm * Packag...

Manufacturer: Buybits Brand: Ultimate Addons Model: 13379

Important: When using any bike mount ALWAYS ensure you have attached the case / cradle correctly before inserting your phone. All cradles, holders & cases slide on to the mount and CLICK firmly in to place. If you don't hear a CLICK it isn't correctly positioned. Note: To maintain the water resistant properties of this case there's no cable entrance. We have tested this case's performance in extreme weather conditions and have found it provided reliable protection against rain, snow & damp air although please note that this case should not be submerge underwater.

Manufacturer: The Joy Factory Brand: The Joy Factory Model: CWD110 Color: Turquoise

Stylish, Thin & Strong The aXtion Go for iPhone 5s ID Touch Compatible is the most unique case to be released in years. Bridging the thin, stylish contour of a fashion case and the full-orbed protection of a waterproof/rugged case, the aXtion Go is the one case you'll need for everyday protection wherever you may go. Drips. Spills. Splashes. . . No Problem. The aXtion Go is waterproof-rated IP65. That means it can handle spilled coffee, rain, messy fingers, or a brief drop in the water and keep your phone safe and sound. Unbelievable Drop Protection The thin profile of the aXtion adds only 0. 17” (4. 4mm) to the iPhone, yet packs in both our proprietary Sandwich Quad-Layer Protection featuring our Diamond Air Cushion technology for the highest level of shock protection in a case so small. Picture-taking Perfection Enjoy crystal-clear photos with the aXtion Go's Sharpvue Ultra-Clear Anti-Scratch camera lens. When taking pictures at night, the extra-large camera cutout reduces light leak from the nearby flash. And the raised Volume+ button allows your finger to find it quickly so you never miss the perfect shot. The Best Built-in Screen Protector The aXtion Go comes equipped with a built-in SureGuard screen protector. This thin marvel provides heavy-duty protection for your screen with a cover so fluid and responsive, you'll swear there's nothing there. Amazing Sound Quality The iPhone 5 is, after all, a phone—so don't settle for a bulky case that muffles your voi...

Manufacturer: china Brand: Casewarehouse Model: 4068099 Color: Yellow

100% Brand New & Made Specially for iPhone 6S Plus/6 Plus 5.5" (LARGE) Underwater photo-taking Housing IPX8* 40Meters 130FT Guaranteed Anti-reflection window lens for high quality pictures 1m Shockproof -10 degrees Freezeproof IPX6* Dust Proof: IPEX class 6 for dustproof 60 Degrees Heat-resistant Operating Temperature: 0 to 40 degree C° Storage Temperature: -10 to 65 degree C° Please read carefully and follow the pre-install iPhone settings before use. Specifications: Model: Vi10 Major Materials: Polycarbonate, Glass and Stainless Steel Product size: 18.5cm x 9.5cm x 3cm Product weights: 325g Package size: 22.5cm x 11.5cm x 5cm Package weights: 438g Package Contents: Waterproof housing Case x 1 Installation guide x 1 Hand Strap x 1 Accessory ONLY, iPhone is not included**PLEASE NOTE: this housing is for iPhone 6S Plus/6Plus 5.5" ONLY, it is NOT compatible with iPhone 6/6S 4.7"**

Manufacturer: china Brand: Casewarehouse Model: 4068098 Color: Red

100% Brand New & Made Specially for iPhone 6S Plus/6 Plus 5.5" (LARGE) Underwater photo-taking Housing IPX8* 40Meters 130FT Guaranteed Anti-reflection window lens for high quality pictures 1m Shockproof -10 degrees Freezeproof IPX6* Dust Proof: IPEX class 6 for dustproof 60 Degrees Heat-resistant Operating Temperature: 0 to 40 degree C° Storage Temperature: -10 to 65 degree C° Please read carefully and follow the pre-install iPhone settings before use. Specifications: Model: Vi10 Major Materials: Polycarbonate, Glass and Stainless Steel Product size: 18.5cm x 9.5cm x 3cm Product weights: 325g Package size: 22.5cm x 11.5cm x 5cm Package weights: 438g Package Contents: Waterproof housing Case x 1 Installation guide x 1 Hand Strap x 1 Accessory ONLY, iPhone is not included**PLEASE NOTE: this housing is for iPhone 6S Plus/6Plus 5.5" ONLY, it is NOT compatible with iPhone 6/6S 4.7"**

Manufacturer: BOLISH Brand: Bolish Model: 4058865 Color: Fluorescence Green

FAQ: 1. How do I install the case? The package comes with a BOLISH flathead screwdriver, remove the two screws at the bottom on the back, peel off the inner protective film on the upper half, place the iPhone 6 rightly in to the position, then snap back half on tight and tighten the screws, make sure the touch screen is sealed with the upper half. 2. Why the touch screen seems slower than used to? Peel off the inner protective film(it's inside the upper half) and tighten the two screws at the bottom, make sure there is no loose sound or space between the two screens. 3. What is IP67? Solids: Dust tight - No ingress of dust; complete protection against contact. Liquids: Immersion up to 1 m - Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time. 4. Cautions on BOLISH iPhone 6 Case Please make sure you peel off the inner protective film for the first time use. Please make sure you tighten the two screws at the bottom after your iPhone 6 is installed. Please make sure you seal the rubber coverat the bottom after fully charged your phone. Parameters: Brand: BOLISH Name: 3-Proof iPhone 6 Case Material: Bio-plastic & Tempered glass film Compatible with: iPhone 6 4.7" Screen Color: Gun Black, Italian Red, Champagne Orange, Fluorescence Green, Aqua Blue Size: 154*79*13mm 188*119*31mm with retail package Net Weight: 78g Gross Weight: 207g Features: Ultra thin & light we...

Manufacturer: BOLISH Brand: Bolish Model: 3317157 Color: Gun-Black

FAQ: 1. How do I install the case? The package comes with a BOLISH flathead screwdriver, remove the two screws at the bottom on the back, peel off the inner protective film on the upper half, place the iPhone 6 rightly in to the position, then snap back half on tight and tighten the screws, make sure the touch screen is sealed with the upper half. 2. Why the touch screen seems slower than used to? Peel off the inner protective film(it's inside the upper half) and tighten the two screws at the bottom, make sure there is no loose sound or space between the two screens. 3. What is IP67? Solids: Dust tight - No ingress of dust; complete protection against contact. Liquids: Immersion up to 1 m - Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time. 4. Cautions on BOLISH iPhone 6 Case Please make sure you peel off the inner protective film for the first time use. Please make sure you tighten the two screws at the bottom after your iPhone 6 is installed. Please make sure you seal the rubber coverat the bottom after fully charged your phone. Parameters: Brand: BOLISH Name: 3-Proof iPhone 6 Case Material: Bio-plastic & Tempered glass film Compatible with: iPhone 6 4.7" Screen Color: Gun Black, Italian Red, Champagne Orange, Fluorescence Green, Aqua Blue Size: 154*79*13mm 188*119*31mm with retail package Net Weight: 78g Gross Weight: 207g Features: Ultra thin & light we...

Manufacturer: Buybits Addons Brand: BuyBits Addons Model: 10314 Color: Clear

This mounting bundle includes the best selling Ultimate Addons Tough case for the Apple iPhone 4 & comes complete with the 1" (25.4mm) ball fitting needed to allow the case to be attached to your existing RAM Motorcycle Mount. The custom made adaptor incorporates the Addons 3 lug mounting system with the RAM 1" ball. This 3 way system attaches directly to the Tough Case. Use with your own RAM mount. The RAM ball fits your RAM Arm. Suitable for use with the arms : RAM-B-201 RAM-B-201A Ram-B-201C. Note: Arms NOT supplied The TOUGH CASE for the APPLE iPHONE 4 All weather protection for your iPhone 4. The Tough Case incorporates a strong durable weatherproof case with a protective silicon lining bespoke for the Apple iPhone . Designed to standard IPX4, this all weather case will keep your iPhone 4 secure and dry in most riding conditions. Solid & robust case has been designed to withstand daily use and will protect against wet / damp weather. Access your iphone through the touch sensitive lens. This lens has been made for today's technology. The view remains clear and the sensitivity remains very responsive. Hinged with two secure side clamps which click reassuringly in place. Internal moulded silicon liner fits the Apple iPhone 4. This dedicated liner has been designed to contour the iPhone 4, cushioning it against knocks or bumps and reducing shock if dropped. Included is a detachable soft web lanyard with safety clasp. Power cable access for your original charger...

Manufacturer: Buybits Brand: Ultimate Addons Model: 11081

Tough case has a dedicated silicon liner which fits the Apple iPhone 4 only. THREE size of M8 bolts are supplied 1 x 55mm M8 screw bolt 1 x 60mm M8 screw bolt 1 x 65mm M8 screw bolt Although we supply three sizes of M8 bolts in this kit you may find the lengths are not suitable for your needs. On this rare occasion you can purchase longer bolts from a reputable merchant. This is also the case if you wish to use this mount but require UNF. Waterproof IPX4 Tested - suitable for general use in most weather conditions. Will protect from damp weather and rain showers. NOTE: Do not submerge case or use underwater.