The Wilson Electronics Low-Profile 50_ Omnidirectional Vertical Mount Antenna with 14ft RG174 Cable amp;amp; SMA Male Connector is designed for discreet installation, and is for use as an inside antenna in a vehicle or building. If mounted on a building, it needs to be at least 6 inches away from metal. Bands and gain specs are: 700MHz - 800MHz, Gain: 3.4dBi 824MHz - 894MHz, Gain: 2.2dBi 880MHz - 960MHz, Gain: 1.2dBi 1,710MHz - 1,880MHz, Gain: 1.4dBi 1,850MHz - 1,990MHz, Gain: 3.2dBi 2,110MHz - 2,170MHz, Gain: 4.3dBi The antenna itself is 5 inches long by 1.5amp;quot; wide, has vertical polarization and is omnidirectional when mounted vertically.
Model_Number - 301152
Depth - 5.15
Height - 1.60
Width - 3.25
Product Information Specifications for WSN301152 - WILSON 301152 Low-Profile 50_ Omnidirectional Vertical Mount Antenna with 14ft RG174 Cable amp; SMA Male Connector Below:
zBoost ZB545M SOHO Max Dual Band Cell Phone Signal Booster for Home and Office, up to 3,500 sq. ft.
Kit: base, indoor & external antenna, power supply, RG-6 cable (35 & 15 ft.) and window-entry cable zBoost SOHO Max ZB545M setup illustrationView larger Say goodbye to dropped and missed calls in your home or office! zBoost offers the zBoost SOHO Max as the solution to missed and dropped calls inside your home or office space. The zBoost SOHO Max boosts voice and text coverage for all major US and Canadian carriers. It captures the reliable cellular signal you have outdoors and rebroadcasts it indoors, up to 3,500 square feet, so you can enjoy clearer, faster and more reliable service without interruption. Coverage will vary with outside signal strength, interior walls and distance from the Base Unit. Enjoy clearer, faster and more reliable service without interruption If you find that you must be near a window or outside to get adequate cell phone reception, then a zBoost cell phone booster is the solution. There are a number of reasons why you may be experiencing poor reception. The most common reasons are:  Distance from the cell phone tower  Obstructions caused by terrain, trees, buildings  Energy efficient windows and other construction materials The zBoost SOHO Max ZB545M system includes everything you need  Step-by-step instructions  External Antenna  RG-6 coax cables: 15 feet, 35 feet, and window-entry cable  Base Unit: Amplifies the signal and provides oscillation protection for the carrier network  Indoor Antenna Easy Setup in 4 easy step...
Yagi antenna is ideally suited for providing and/or improving reception in residential homes, work shops, small-sized parking garages, basements , small office areas, rural areas and places where the reception is weak. It will help to boost signal and increase data transfer speed.
The package contains Wide-Band Log Periodic Yagi Antenna with 30ft cable, mounting hardware and Antenna adapter for Novatel Verizon MiFi 6620L
700MHz-2700MHz Wide-Band Log Periodic Yagi Antenna Highest Gain
* Frequency Range (MHz): 698-960/1710-2700 mHz
* Gain: 11 dBi
* VSWR: =21
* Max, power(W): 100
* Connector Type on Antenna: FME male
* Lightning Protection: DC ground
* Antenna Dimension (mm): 445x210x70
* Rated Wind Velocity(km/h): 100
* Radome material: protected ABS
* Cable on Antenna (mm): 400
* Diameter of installation pole(mm): 30~53
* Working Temperature(C): -40~+60
* LMR200 Low-Loss Extension Cable
* Extension Cable length: 30 feet
* Extension Cable connector: FME Female
Novatel Verizon MiFi 6620L External Antenna Adapter
* Connector: FME Male
* Cable: RG174
* Length : 17 inch
* Impedance: 50 ohms
The wide Band Log Periodic Directional Antenna will collect the cell tower signal and send it through the cable to an amplifier, cell phone or cellular data card. When the cell phone or cellular data card transmits, the signal is transferred to an amplifier or directly to the antenna and broadcast back to the cell tower.
Consumer Alert: Before use, you must register this device with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Although AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device, you must still register. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Wilson Electronics Dual Band - 800-1900 MHz 75 Ohm Building Mount Antenna with F Female Connector and 12-Inch RG58 Coax Cable
Manufacturer: Wilson Electronics
Brand: Wilson Electronics
Increase signals in style with the 800/1,900 MHz, 75_ Building Mount Antenna with 12" Coaxial Cable with F Female Connector. Designed for home- and business-based repeater kits, the dual-band, 75_ antenna features a fiberglass construction. The weatherproof antenna is designed for use with the WilsonÂ Signal Boost DT 801247.
TROUBLESHOOTING STEPS: 1. Your base station should already be activated. If your base station has not already been activated, call Sprint Customer care to complete your activation process 2. Make sure that both your router and your Internet Broadband modem are functioning properly. 3. Place the base station near a closed window and in a central location. For best results, place the base station in an elevated location, such as the top of a bookshelf or tall cabinet 4. Connect one end of the included Ethernet cable toan open port on the router (1) and connect the other end to the WAN port located at the rear of the base station 5. Plug the power supply connector into the DC 5 V power port located at the rear of the base station 6. Insert one end of the power cord into the power supply and then plug the other end into an available power outlet 7. Confirm that the front LEDs are illuminated
Wilson 991183 Replacement Arms for Sleek Amplifier
Manufacturer: Wilson Electronics
Brand: Wilson Electronics
Original OEM Side Replacement arms for your Wilson Sleek Cell Phone Booster / Cradle Amplifier. Part number 991183.
Broke the arms on your cradle? Prefer a different size than the one that came with your amp? Or, would just like to keep some spares around?
Fits the Wilson Sleek Cradle Amplifier 815225 (identical to the cradle that ships in the 815226 kit)