XHTECH CDMA PCS 850/1900MHz Dual Band Cell Phone Signal Booster Amplifier Repeater+Antenna Set

Manufacturer: maxmostcom Brand: maxmostcom Model: S9-9KNP-TXW3

Yagi antenna is ideally suited for providing and/or improving reception in residential homes, work shops, small-sized parking garages, basements , small office areas, rural areas and places where the reception is weak. It will help to boost signal and increase data transfer speed. The package contains Wide-Band Log Periodic Yagi Antenna with 30ft cable, mounting hardware and Antenna adapter for Novatel Verizon MiFi 6620L 700MHz-2700MHz Wide-Band Log Periodic Yagi Antenna Highest Gain * Frequency Range (MHz): 698-960/1710-2700 mHz * Gain: 11 dBi * VSWR: =21 * Max, power(W): 100 * Connector Type on Antenna: FME male * Lightning Protection: DC ground * Antenna Dimension (mm): 445x210x70 * Rated Wind Velocity(km/h): 100 * Radome material: protected ABS * Cable on Antenna (mm): 400 * Diameter of installation pole(mm): 30~53 * Working Temperature(C): -40~+60 * LMR200 Low-Loss Extension Cable * Extension Cable length: 30 feet * Extension Cable connector: FME Female Novatel Verizon MiFi 6620L External Antenna Adapter * Connector: FME Male * Cable: RG174 * Length : 17 inch * Impedance: 50 ohms The wide Band Log Periodic Directional Antenna will collect the cell tower signal and send it through the cable to an amplifier, cell phone or cellular data card. When the cell phone or cellular data card transmits, the signal is transferred to an amplifier or directly to the antenna and broadcast back to the cell tower.

Manufacturer: weBoost Brand: weBoost Model: 470101

Consumer Alert: Before use, you must register this device with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Although AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device, you must still register. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

Manufacturer: Wilson Electronics Brand: Wilson Electronics Model: 301201 Color: White

Increase signals in style with the 800/1,900 MHz, 75_ Building Mount Antenna with 12" Coaxial Cable with F Female Connector. Designed for home- and business-based repeater kits, the dual-band, 75_ antenna features a fiberglass construction. The weatherproof antenna is designed for use with the Wilson Signal Boost DT 801247.

Manufacturer: Wilson Electronics Brand: Wilson Electronics Model: 301127 Color: Black

Shipping Height: 0.1 Shipping Width: 3.0 Master Pack Qty: 50 General Information Manufacturer: Wilson Electronics, Inc Manufacturer Part Number: 301127 Brand Name: Wilson Product Model: 301127 Product Name: 301127 Antenna Product Type: Antenna Technical Information Directivity: Omni-directional Application/Usage: Cellular Network Frequency: 1.85 GHz to 1.99 GHz Frequency: 806 MHz to 894 MHz Gain: 2.2 dBi - 894 MHz Gain: 3.2 dBi - 1.99 GHz Impedance: 50 Ohm Interfaces/Ports Connectors: 1 x FME Female Physical Characteristics Height: 5.0 Miscellaneous Package Contents: 301127 Antenna 3M Adhesive

Manufacturer: AIRAVE Brand: Airave Airvana Model: C1-600-RT

TROUBLESHOOTING STEPS: 1. Your base station should already be activated. If your base station has not already been activated, call Sprint Customer care to complete your activation process 2. Make sure that both your router and your Internet Broadband modem are functioning properly. 3. Place the base station near a closed window and in a central location. For best results, place the base station in an elevated location, such as the top of a bookshelf or tall cabinet 4. Connect one end of the included Ethernet cable toan open port on the router (1) and connect the other end to the WAN port located at the rear of the base station 5. Plug the power supply connector into the DC 5 V power port located at the rear of the base station 6. Insert one end of the power cord into the power supply and then plug the other end into an available power outlet 7. Confirm that the front LEDs are illuminated

Manufacturer: Wilson Electronics Brand: Wilson Electronics Model: 991183

Original OEM Side Replacement arms for your Wilson Sleek Cell Phone Booster / Cradle Amplifier. Part number 991183. Broke the arms on your cradle? Prefer a different size than the one that came with your amp? Or, would just like to keep some spares around? Fits the Wilson Sleek Cradle Amplifier 815225 (identical to the cradle that ships in the 815226 kit)

Manufacturer: zBoost Brand: zBoost Model: CANT-0033

Outdoor Signal Antenna for YX545 SOHO

Manufacturer: Wilson Electronics Brand: Wilson Electronics Model: 311112 Color: Black

Wilson Electronics (800/1900 MHz) NMO Antenna

Manufacturer: zBoost Brand: zBoost Model: ZB560SL Color: Black

The zBoost Extreme REACH Cellular Phone Signal Booster provides increased in-building voice and data coverage and superior reach into rural environments using a high-gain directional external antenna which is aimed at the nearest network tower. zBoost Extreme REACH boosts cell phone signals for voice calls and text for all major carriers. Extreme REACH captures the good cellular signal you have outdoors and rebroadcasts it indoors, up to 7,500 square feet, so you can enjoy clearer, faster service without interruption. The ZB560SL is backed by a two-year manufacturer’s warranty replacement and ships complete: amplifier base unit, indoor antenna, power supply, 50-feet of RG6 cable, external directional antenna and mounting hardware.