Magnetic Metal Phone Holder,ACLUXS 360 Rotation Multifunctional Magnetic Cell Phone holder Phone Holder Bracket for iPhone iPad Smartphones in Car,Dashboard Holder ,Car Kits, Bathroom(Gold)

Color:Gold
ACLUXS Magnetic Car Mount Kit can be used anywhere literally. Its adhesive base allows you to stick it to whatever surface you want, including your car dashboard, office desktop, or kitchen counter. Don't worry about it falling off, even if you are driving down a dirt road in the mountains this phone holder STAYS STUCK!

Magnetic phone socket installation instruction:

1.Wipe clean the reverse side and the base of the mobile phone or tablet PC with alcohol pad.

2. Tear off the 3M release paper from the reverse side of the base and stick the base to an appropriate position in your car.(Press for at least 10 seconds with no less than 3KG force and leave it after 2 hours.)

3.Place the disk on the spherical base and adjust it to the suitable angle.

4.Tear off the 3M release paper on the back of the magnetic sheet and stock it to the center of the reverse side of the mobile phone or tablet PC.

5. The use effect is shown in the picture.

How Dash ball Mount Works:

1. Before removing the backing, test the position of the dash ball mount in a few different places on dash. For best result, test with phone attached to dash ball mount to choose location.

2. Use the alcohol pad to clean chosen area. Do not use any household cleaners. If the dash ball mount will be installed onto a hard surface such as hard plastic, metal or wood veneer, go to step 3.

3. Peel the adhesive backing from dash ball mount carefully, position the ball mount at the dash board and then press firmly into the place .

4. Wait for 24 hours before applying device to dash ball mount to allow sufficient cure time for adhesive.

Note:

While this magnet will not harm your phone, make sure to keep it away from credit cards, pacemakers, and magnet-sensitive devices.